Multi-Technology Wall/Corner Occupancy Sensor

• Multi-Technology: By using both PIR and U/S signals, the sensor minimizes false triggering for high reliability.

• Flexible Base Mounting: Supplied twist-and-lock base mount permits fast alignment. Supplied cover hides mounting hardware and wires. Can be used with raceways for hard surface installations. Adjustable canopy for wall or ceiling mount.

• Wide Coverage: Over 1200 sq. ft of coverage.

• Fast, Simple Installation: A single mounting post and three color coded wires make installation easy.

• Self-Adjusting: Internal microprocessor continually analyzes, evaluates and adjusts sensitivity and time delay settings. Performance is kept at a maximum and user complaints are eliminated.

• Non-Volatile Memory: Learned and adjusted settings saved in protected memory are not lost during power outages.

• Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit programming.

• Ambient Light Recognition: A Light Sensor prevents lights from turning on when the room is adequately lit by natural light.

• Walk-Through: Provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space.

• Custom off-white color matched for shaded ceiling/corner spaces and most common ceiling tiles.

• Uses OSPP xx Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low voltage). Multiple sensors can control single or multiple power packs.

• Power base (OSPB 15A) available for line voltage applications

• High Motion Sensitivity: The large lens area and multi-element lens design give excellent range and sensitivity.

• Infrared Sensing: High sensitivity 9.8 micron detector dual element.

• Device: High-impact housing and injection molded plastic. Color coded wire leads are 6” long (16.24 cm). • Lens: 110˚ aperture, lens opening 2.2” x 1.47”, 36 elements (72 zones) small motion range 31 ft, large motion 68 ft.